Causes of transmission gear wear
Transmission gear often works under the condition of high speed, high load and constant alternating speed and load. In addition to the normal wear and tear of gears, there are also reasons such as poor quality of lubricating oil, poor lubrication conditions, improper driving operation, improper gnawing position of gears during repair, which will cause gear impact, poor gnawing of gear teeth and starting vibration, which will accelerate the wear and damage of gears. In addition, the wear and deformation of other parts of the gear (such as the spline groove in the gear hole, bearing, spline shaft, etc.), improper installation of the clutch or transmission shaft, and some manufacturing defects (such as uneven carburizing layer, gear warping, etc.) will also accelerate the wear of the gear.
Gears rely on their own layout standards and material strength to accept external load, which requires materials with high strength and wear resistance; Due to the disordered shape of gear, the demand of gear precision is high, and the material technology is good.
Article from：http://www.takasiyone.com
-
07-10
Why can transmission change speed and what kind of transmission?
Why can the transmission change speed?Why can the gearbox adjust the output torque and speed of the machine? It's the principle of gears and levers. There are many different gears in the gearbox. Through the combination of gears of different sizes, the adjustment of torque and speed can
-
07-10
Causes of transmission shifting
Causes of transmission shift skipping defect:l) Due to the excessive wear of the gear teeth of the variable speed gear, gear sleeve or synchronizer cone, a rudiment is formed along the direction of the tooth length, and an axial thrust is generated when the gear is meshed, which is also affe
-
07-10
Three types of transmission
There are three common types of automatic transmission: at, CVT, AMT and DSG. At that time, at was widely used, and at almost became the pronoun of automatic transmission.At is composed of hydraulic torque converter, planetary gear and hydraulic operation system, which ends the variable spee
-
07-09
Causes of transmission gear wear
Transmission gear often works under the condition of high speed, high load and constant alternating speed and load. In addition to the normal wear and tear of gears, there are also reasons such as poor quality of lubricating oil, poor lubrication conditions, improper driving operation, improper